Fluke CableIQ Qualification Tester

63,000,000تومان

شناسه محصول: CIQ-100 & CIQ-KIT & CIQ-KRQ_36 دسته: سایر محصولات فلوک

توضیحات

توضیحات

برخی از امکانات دستگاه Fluke CableIQ Qualification Tester عبارتند از:

•   اعلام پهنای باند هر کابل(۱۰/۱۰۰/۱۰۰۰/VOIP/… )
•   تعیین طول مسیر کابل
•   تعیین ایرادهای سربندی مانند Cross، Split، Short و Wiremap
•   تعیین فاصله تا ایراد Distance to fault
•   اعلام Crosstalk
•   اندازه گیری میزان impedance کابل
•   خاصیت Blink جهت تعیین پورت سوئیچ
•   امکان ذخیره سازی تست شیت و پرینت آن

UTP, STP, FTP, SSTP, RG6, RG59, audio and security	Cable types supported

۱۰۰۰BASE-T, 100BASE-TX, 10BASE-T, VoIP, 1394b S100, TELCO, Wiremap only, Coax	Qualification autotests
Wiremap, length, cable signal performance, digital toner, analog toner, Ethernet port detection and identification, analog telephone detection, blink port light, continuity, speaker test, cable fault finding, video signal detection.	Supported tests
Can detect single wire faults and supports MultiMap mode with up to seven remote office identifiers. Draws proportional wire length to breaks. Detects split pairs.	Wiremap
Measures crosstalk and impedance and compares against appropriate limits based on qualification test selected. Detects location of large point sources as well as distributed sources in the cabling if they are sufficient to disqualify the application	Find fault
Up to 250 qualification test results	Results storage
Battery type: 4 AA (NEDA 15A, IEC LR6) alkaline batteries	Power
۲۰ hours of typical use, without backlight	Battery life
۴AA photo lithium, NIHM, NICAD	Other battery types supported
۷in x 3.5in x 1.75in (17.8cm x 8.9cm x 4.5cm) 1.2 lb (0.55 kg)	Dimensions and weight